Tag: baffles

New Firearms Retailer Provides an Indoor Shooting Range for an Area Long Neglected

Posted on by Marketing Action Target

Red Dot Firearms of Layton, Utah, joins the short list of gun ranges in Davis CountyRed Dot Firearms 21

PROVO, Utah – May 22, 2013 – Davis County, Utah, recently welcomed a new kind of business to one of its largest shopping districts. Now you can get all of your grocery shopping done and hit the indoor shooting range all in the same place.

Red Dot Firearms, located just off I-15 exit 331 in Layton, recently opened its retail gun store and a 25 yard indoor shooting range capable of handling both handgun and rifle rounds including .5o BMG.

“We are the only retail firearms store in the area besides some of the big box stores, and we were the first place ever to apply for an indoor range license in the county,” owner Denny Wanlass said. “We felt like it was time people in the area had another option.”

According to Wanlass, many shooters in Utah have started moving their weekend shooting ventures away from public lands due to wildfires and other concerns, which means a higher demand for indoor ranges like Red Dot Firearms.

Red Dot Firearms 02
The ventilation system blows refrigerated air from the rear of the range to the bullet trap where it is filtered to prevent shooters from being exposed to hazardous lead dust.

“A lot of people just drive out to the desert to shoot, but last summer, several wildfires were blamed on target shooting. Whether true or not, it’s still driving many shooters away from the wilderness areas and indoors,” Wanlass said. “That combined with the closures of public land and the increase in gas prices make our indoor range the perfect alternative.”

Shooters transitioning from the outdoors also get the added benefit of a climate controlled environment and a ventilation system installed by Carey’s Small Arms Range Systems that exceeds NIOSH, EPA and OSHA standards.

“We wanted a good ventilation system because we take our customers’ health very seriously,” Wanlass said. “Just about every person who has come out of there has said, ‘I love being in a range where I can breathe!’”

Fellow Utah business Action Target was contracted to install the range equipment at Red Dot Firearms including a 48-foot wide steel funnel bullet trap, armor steel ceiling and wall baffles to prevent rounds from escaping, and shooting stalls capable of stopping rifle rounds from point blank range.

Red Dot Firearms 01
The Total Containment Trap is capable of handling handgun and rifle rounds including .50 BMG.

“Throughout the course of our research, it was clear that there really isn’t anyone else besides Action Target that is worth using,” Wanlass said. “The equipment on our range is second to none, and that means our customers can shoot with complete confidence that their safety is never going to be jeopardized.”

Red Dot Firearms is now open Monday through Friday from 10 a.m. to 8 p.m. and Saturday from 10 a.m. to 6 p.m. Classes in concealed carry, personal defense, hunter’s safety and more will be held regularly.

Three Keys to Getting Your Shooting Range Approved

Posted on by Marketing Action Target

In the process of building a shooting range, perhaps the most intimidating part is getting it approved by your local government. Even after you’ve done all the work, raised all the money, and planned everything out, the final say still comes down to a handful of elected officials. Don’t let that make you feel powerless, though. Even if the ultimate decision is in someone else’s hands, there are still things you can do to increase your chances of success.

1) Talk to the Right People

Your local government officials need to know as soon as possible that you’re planning to build a shooting range. They’ll appreciate it if you inform them early and often of your intentions, and that communication can open doors for you later on. You’ll have a much better chance of getting your range approved if you’ve established a relationship with local leaders from the beginning.

Early communication will also help you figure out zoning issues. In most cases, land has to be zoned as either commercial or industrial for a shooting range to be built on it. Find out first thing if the land you’re looking at is zoned appropriately. Zoning requirements for building a shooting range vary depending on where you live, and some places may not even have specific guidelines for ranges. Your local officials will have the most accurate information and can help you understand the requirements. Should you discover that the land you plan to build on is not zoned appropriately for a shooting range, ask the planning and zoning committee if it can be re-zoned. Often, city governments are willing to work with local businesses on zoning issues to keep potential commerce from going elsewhere.

2) Educate Yourself

AT Builds Indoor Firing Range for OrlandoThe more you know about what’s required to get your range approved, the better. Become familiar with local noise and firearms regulations as well as environmental restrictions that will apply to your shooting range. How will you handle noise abatement? How will you dispose of lead? How will you keep customers and employees safe? All of these issues will come up when presenting to the city council. If you already know what their concerns are by asking questions and doing research, you can adequately prepare to answer them.

Once you know what standards you’re shooting range will be required to meet, talk to an Action Target territory manager to find out what options are available. Action Target specializes in building state-of-the-art shooting ranges and offers several technologies to meet the stringent requirements of government regulations. For example, Action Target’s Total Containment Trap (TCT) is the most environmentally-friendly bullet trap in the industry and makes lead containment safe and easy. With the addition of a Screw Conveyor System (SCS), all bullets and range debris are safely collected and deposited into a sealed barrel for convenient disposal. Action Target also provides sound-abating safety baffles, acoustically-rated wall systems that reduce reverberation by 98%, bullet-proof transparent lane dividers, and ventilation systems that filter air and protect customers from lead exposure. No matter what regulation your shooting range is under, chances are Action Target has a patented technology to meet it.

3) Prepare to Present

Once you’ve talked to your local government officials and learned everything you need to know about regulations and restrictions, all that’s left to do is present your plan to the city council. For those inexperienced in public speaking, this may be the scariest part of the whole process. To make the experience smoother, ask a city council member in advance what information they want from you, write down a list of questions they may ask you, and prepare all of your answers ahead of time so you don’t forget in the heat of the moment.

If you feel like you need additional backup, Action Target representatives are more than willing to attend the city council meeting with you no matter where you live. That way you can have a shooting range expert standing next to you to answer any questions about the technology and safety features of your future range.

The sales team at Action Target is willing to do whatever it can to make the approval process as seamless and successful as possible for you. If you have any questions or concerns about getting your shooting range approved, call Action Target at (801) 377-8033 and ask to speak with your area representative.

And be sure to check out our Build Your Range tool by clicking here.

Please note, the tips included in this message have been found to be helpful for many clients throughout the years, but may not apply in all situations. Please use judgment in determining which tips will be helpful in your particular situation.

This article was originally published in the Action Target Journal on June 14, 2012.

The Equipment You Need to Make a Good Shooting Range Great: Pt. 2

Posted on by Marketing Action Target

By Matt Brinkerhoff, Action Target Range Consultant

When it comes to shooting ranges, bullet containment is the paramount concern. As we discussed in our last article, the appropriate bullet traps and safety baffles need to be in place in order to keep your customers and employees safe. That means bullet traps that reliably collect and store bullets and allow for safe disposal of collected lead. That also means ballistic paneling on the walls and ceilings to ensure any shot that misses the bullet trap has no chance of exiting the building. But once you’ve established a strong foundation with the help of Action Target, you can move on to the more glamorous aspects of building a shooting range, like target retrieval systems and computer controlled reactive targets.

Here at Action Target, we provide a wide array of shooting range equipment from moving targets and shooting stalls to sound abatement and ventilation. With the help of our many corporate partners, we do our best to give you the most complete shooting range package on the market.

Target Systems

With the assistance of our business partner Mancom, Action Target has worked to provide several different target retrieval systems to meet the specific needs of customers. Our Standard Smart Target Retriever eliminated the problem with sag and sway that are inherent in many cable guide designs with the use of a rigid steel track and armored trolley system. Distance control is also made easier with two different operation options. With our toggle option, a simple flip of a switch send the target back to a pre-determined distance, while our Smart Pad gives the shooter complete control over distance and movement. With the addition of our Deluxe Smart Retriever, which allows 180 degree turning action, the shooter or range master also has the ability to program and replay a series of target positions and turning actions.

If your shooting range needs to facilitate tactical training, however, you may want more than just a static position in a stall. Proper tactical training requires realistic scenarios, which means shooter movement and target movement. Training on moving targets hasbecome mandatory for law enforcement agencies across the country. Because running seems to be a part of most gunfights, the ability to fire safely and accurately at moving threats can be one of an officer’s greatest assets. To better facilitate quality tactical training, Action Target provides two types of running man systems: the portable Runner family and the more permanent Track Runner. The portable Runner systems not only simulate horizontal running scenarios, but armed charging scenarios as well. With two AT Builds New Shooting Range and Storedifferent portable systems to meet your budget and needs, running targets can easily be incorporated into your training program. The Track Runner provides the tools for a wide variety of situation with single or double track configurations, cardboard and steel target compatibility, variable speed and electric braking, and remote hand held control of movement.

Action Target also provides turning targets to foster quick and accurate reactions with good guy / bad guy threat identification. Drawing and firing at a target you already know is a threat is fairly easy, but real life scenarios aren’t always so simple. To eliminate the inaccuracy of this scenario, law enforcement demanded targets that turn toward and away from the shooter at specific time intervals. Turning targets allow trainees to practice evaluating the target quickly while performing tactical maneuvers. With six different turning target systems, Action Target can design the perfect system to fit your needs.

Ventilation

Ventilation is extremely important on indoor shooting ranges. Lead and other airborne toxins are introduced to the environment during shooting and can be hazardous to the health or your employees and customers if inhaled. Any enclosed area where shooting is done must be properly ventilated in order to meet NIOSH, EPA, and OSHA standards. Installing a ventilation system for your range may be beyond the abilities of your friend George who does air conditioning. Improperly designed systems may just stir up the air rather than replace it.

Action Target provides you with the best and safest ventilation system. Our ventilation systems are the best-performing and most efficient systems available on the market today and are designed to exceed NIOSH, EPA, and OSHA air quality standards. Through the use of a ceiling-mounted 180 degree air delivery system as well as digital and analog control systems which adapt to changing environmental conditions to maintain the required air velocities and building pressures, Action Target’s ventilation systems push and pull air downrange at a rate fast enough to completely replace the air within a large range in less than two minutes. The air then goes through preliminary filters to remove large impurities before passing through a HEPA filter to eliminate 99.97% of remaining contaminants, making the exhausted air even cleaner than the air outside.

Sound Abatement

Sound abatement is one of those things many shooting range owners ignore initially and then wish they hadn’t when neighbor relations begin to decline. If your shooting range is near residential areas or if housing begins to develop around your range, proper sound abatement is absolutely vital to your future success. If too many people begin to complain about the noise level, you could be shut down permanently.

But sound abatement is not only important for the people outside the range, but for people inside the range as well. Gunshots have an extremely high decibel level which is only compounded on an indoor range when the sound waves bounce off the hard floor, walls, and ceiling. Ear protection is absolutely necessary on any range, but it may not be enough to protect your employees who spend hours and hours in the range every day. The constant reverberation of gunshots within an enclosed area can actually produce negative physical effects on the body other than just hearing loss. Prolonged exposure to high decibel percussive noise such as gunshots can cause nausea or fatigue if the reverberation isn’t properly dissipated.

These problems can be easily avoided by limiting the length of shifts for employees working in the range and by installing proper sound abatement material. All ceiling and wall baffles installed by Action Target are covered with acoustic tiling to help reduce the amount of reverberation within the range. We’ve also teamed up with Troy Sound Wall Systems, the creator of the highest acoustically rated wall systems in the world, to bring you one of the most viable options on the market. By installing the Troy Sound Wall System in ranges, we have managed to reduce reverberation by 98%. That’s 98% percent of reverberation you don’t have to worry about threatening the health of your employees and customers.

Rely on the Experts for Help

Action Target LogoThere are hundreds of things to take into consideration when building a shooting range, but your top priority should always be safety. Before anything else, make sure your range is going to be safe for your customers, your employees, and the environment. If you are considering building a range, talk to the Action Target representative in your region and he will be happy to help you find the right equipment to fit your needs and budget.

Please note, the tips included in this message have been found to be helpful for many clients throughout the years but may not apply in all situations. Please use judgment in determining which tips will be helpful in your particular situation.

The Equipment You Need to Make a Good Shooting Range Great: Pt. 1

Posted on by Marketing Action Target

By Matt Brinkerhoff, Action Target Range Consultant

Anyone who has been to a quality shooting range knows it requires much more than a line drawn in the dirt and a few paper targets. Great shooting ranges are designed to protect customers, employees, and the environment. Here at Action Target, we specialize in designing, manufacturing, and installing superior shooting range equipment to meet all of your ballistic needs from bullet containment to target retrieval systems. Quality matters when the safety of your customers and employees are in question, so don’t settle for good when your shooting range could be great with the help of Action Target.

Bullet containment is the number one concern on any shooting range, and without the proper designs and equipment, it can be nearly impossible to ensure the safety of those inside and outside the range. Bullet containment basically comes down to two elements: bullet traps and baffles. The bullet trap should be designed to stop any high powered round and handle the level of traffic expected at your range while safely collecting all projectiles for proper disposal. Any shot downrange should be stopped by the bullet trap, but safety baffles are also needed to keep bullets from exiting the ceiling of your range or ricocheting off the walls in the event of an errant shot. With the right combination of bullet trap and baffles, you can rest easy knowing no matter where a shot is fired on your range, it won’t have a chance to escape.

Bullet Traps

Action Target offers two different kinds of bullet traps, the Rubber Berm Trap (RBT) and the Action Target Total Containment Trap (TCT). A rubber berm trap consists of an angled metal plate covered in chopped rubber two feet thick. Action Target’s rubber berms utilize a patented combination of fire retardant and nonflammable adhesive to minimize fire danger and prevent migration. Being a softer collection medium, rubber significantly reduces ricochet and lead dust in some applications which makes it a great option for ranges that don’t see excessive everyday use. Due to the simplicity and relatively low cost of the materials used, a rubber berm can be extremely economical. But if you start having more shooters than you originally planned for, it can also become a wrench in your wallet. Rubber berms have to be cleaned and the bullets lodged in them mined every 80,000 rounds. Not only does it cost money to clean the rubber berm and replenish the chopped rubber periodically, but the more days you have to close your range for maintenance, the more money you lose.

Action Target's Total Containment Bulle TrapThe Action Target Total Containment Trap can be a great solution to this problem if your daily foot traffic is able to balance the expense of installing and maintaining it. With two different types of lead removal systems, the TCT allows for varying levels of use and greatly diminishes the time you have to spend maintaining your shooting range. Essentially, the TCT is a giant armor steel funnel that directs every shot fired into a small gap at the rear of the trap. Once a bullet passes through that gap, it enters an elliptical deceleration chamber where it spins until it loses energy and falls into the collection trough through the bottom of the chamber. All of the lead is then collected and stored using one of two systems, the hands-free Screw Conveyor System or the Canister System. These two systems are designed to prevent lead exposure and make disposing of hazardous range debris as simple and easy as possible. The TCT is perfect for high traffic ranges, and when combined with our unique Dust Collection Unit, it is the safest and most environmentally friendly bullet trap on the market.

Safety Baffles

Safety baffles are often one of the most neglected areas of shooting range design, but they are absolutely crucial to the ballistic security of your range. In addition to keeping fired bullets from exiting the range, baffles offer protection for overhead lights, pipes, ventilation ducts, and other structures. As much as you would like them to, shooters at your range are not always going to shoot perfectly straight, and when they inevitably hit the ceiling, you’ll be glad you had them installed.

Action Target Safety Baffles used in LAAction Target’s patented wall and ceiling baffles are designed to reduce noise, eliminate ricochet, and ensure complete bullet containment. Our baffles are composed of four layers: acoustic paneling, plywood, an air gap, and steel. Acoustic panels are placed on the outside of our baffles to minimize gunshot reverberation within the range and prevent sound transmission beyond the range. Plywood is then used to contain shots fired into the baffle. Bullets can easily pass through these two layers, but once a bullet hits the steel and shatters, the plywood effectively contains the fragments. The air gap works as a buffer to allow the bullet room for fragmentation before bouncing back against the plywood. The most important part of the baffle is the steel plate. Action Target offers four grades of safety baffles ranging from 10 gauge steel to abrasion resistant armor steel to meet your range’s ballistic specifications and budget. If you know what ammunition and firearms will be allowed on your range, we can help you find the right baffles to complete it.

The type of training your range is expected to accommodate will dictate the configuration of your safety baffles. Action Target offers both static and tactical configurations based on the “no blue sky” principle. According to this principle, a shooter who is facing downrange on an outdoor range (though, this principle also applies to indoor ranges as well) should not be able to see any blue sky. If shooting on your range will only be from a static point on the firing line, the ceiling baffles are placed in a static configuration meaning they are spaced closer together near the firing line and further apart near the bullet trap. Even though there are large gaps between the baffles at the end of the range, no blue sky can be seen from the static shooting position at the firing line which means it’s impossible for a bullet to escape vertically.

If your range is expected to accommodate tactical training where shooters will be moving downrange, having gaps in the ceiling baffles anywhere on the range isn’t acceptable. With a tactical baffle configuration, baffles are place close together and overlap one another so even if a bullet is fired straight up, a baffle will be there to stop it no matter where it is on the range. This tactical configuration allows shooters to move freely without any danger of rounds exiting the ceiling. Wall baffles are also highly recommended if tactical training will be conducted on your range. While hardened concrete is balistically sound, wall baffles add an additional level of protection and completely eliminate ricochet while also decreasing reverberation within the range.

Rely on the Experts for Help

There are hundreds of things to take into consideration when building a shooting range, but your top priority should always be safety. Before anything else, make sure your range is going to be safe for your customers, your employees, and the environment. If you are considering building a range, talk to the Action Target representative in your region and he will be happy to help you find the right equipment to fit your needs and budget.

Please note, the tips included in this message have been found to be helpful for many clients throughout the years but may not apply in all situations. Please use judgment in determining which tips will be helpful in your particular situation.

Three Keys to Getting Your Shooting Range Approved

Posted on by Marketing Action Target

In the process of building a shooting range, perhaps the most intimidating part is getting it approved by your local government. Even after you’ve done all the work, raised all the money, and planned everything out, the final say still comes down to a handful of elected officials. Don’t let that make you feel powerless, though. Even if the ultimate decision is in someone else’s hands, there are still things you can do to increase your chances of success.

1) Talk to the Right People

Your local government officials need to know as soon as possible that you’re planning to build a shooting range. They’ll appreciate it if you inform them early and often of your intentions, and that communication can open doors for you later on. You’ll have a much better chance of getting your range approved if you’ve established a relationship with local leaders from the beginning.

Early communication will also help you figure out zoning issues. In most cases, land has to be zoned as either commercial or industrial for a shooting range to be built on it. Find out first thing if the land you’re looking at is zoned appropriately. Zoning requirements for building a shooting range vary depending on where you live, and some places may not even have specific guidelines for ranges. Your local officials will have the most accurate information and can help you understand the requirements. Should you discover that the land you plan to build on is not zoned appropriately for a shooting range, ask the planning and zoning committee if it can be re-zoned. Often, city governments are willing to work with local businesses on zoning issues to keep potential commerce from going elsewhere.

2) Educate Yourself

AT Builds Indoor Firing Range for OrlandoThe more you know about what’s required to get your range approved, the better. Become familiar with local noise and firearms regulations as well as environmental restrictions that will apply to your shooting range. How will you handle noise abatement? How will you dispose of lead? How will you keep customers and employees safe? All of these issues will come up when presenting to the city council. If you already know what their concerns are by asking questions and doing research, you can adequately prepare to answer them.

Once you know what standards you’re shooting range will be required to meet, talk to an Action Target territory manager to find out what options are available. Action Target specializes in building state-of-the-art shooting ranges and offers several technologies to meet the stringent requirements of government regulations. For example, Action Target’s Total Containment Trap (TCT) is the most environmentally-friendly bullet trap in the industry and makes lead containment safe and easy. With the addition of a Screw Conveyor System (SCS), all bullets and range debris are safely collected and deposited into a sealed barrel for convenient disposal. Action Target also provides sound-abating safety baffles, acoustically-rated wall systems that reduce reverberation by 98%, bullet-proof transparent lane dividers, and ventilation systems that filter air and protect customers from lead exposure. No matter what regulation your shooting range is under, chances are Action Target has a patented technology to meet it.

3) Prepare to Present

Once you’ve talked to your local government officials and learned everything you need to know about regulations and restrictions, all that’s left to do is present your plan to the city council. For those inexperienced in public speaking, this may be the scariest part of the whole process. To make the experience smoother, ask a city council member in advance what information they want from you, write down a list of questions they may ask you, and prepare all of your answers ahead of time so you don’t forget in the heat of the moment.

If you feel like you need additional backup, Action Target representatives are more than willing to attend the city council meeting with you no matter where you live. That way you can have a shooting range expert standing next to you to answer any questions about the technology and safety features of your future range.

The sales team at Action Target is willing to do whatever it can to make the approval process as seamless and successful as possible for you. If you have any questions or concerns about getting your shooting range approved, call Action Target at (801) 377-8033 and ask to speak with your area representative.

Please note, the tips included in this message have been found to be helpful for many clients throughout the years, but may not apply in all situations. Please use judgment in determining which tips will be helpful in your particular situation.

Action Target Renovates Ohio Indoor Range

Posted on by Marketing Action Target

Action Target first worked with Ohio State Highway Patrol back in 1999 when we installed our “state of the art” Total Containment Trap. When it was determined the Highway Patrol would renovate the rest of their existing facility in 2011, we were contacted directly by the architect for specifications on the new equipment that would be provided. Because of the quality, performance, and robust nature of our Total Containment Trap, it was the only piece of equipment not removed and replaced in the 2011 renovation. Due to the heavy use of the range, the project was to be completed on an extremely tight time-line with only six weeks of manufacturing time. Action Target acted as a sub-contractor to Williamson Builders Inc. and together completed the tremendous facility in the time required.

This 24 lane, 25 yard indoor range now provides officers a variety of training options, including timed training qualification courses and decision making drills. In addition, the total containment trap system, and tactical baffle layout allow for dynamic cross lane firing and moving and shooting drills, accomplished under the watchful eye of the RSO through our clear ballistic glass stalls. Such dependability, quality, and versatility are completely unique to Action Target’s design. We thank Ohio State Highway Patrol for their continued business and support!

Action Target Completes Build for Jay Henges Range in MO

Posted on by Marketing Action Target

In 1937, the Missouri Constitutional Amendment created the Missouri Department of Conservation (MDC) to “restore, conserve, and regulate Missouri’s over-stressed fisheries, forests, and wildlife populations.” The MDC administers more than 975,000 acres and maintains five staffed shooting ranges, along with more than 70 unstaffed ranges. These ranges experience tremendous use from Missouri locals, many who are active sportsmen and hunters.

One of the most visited of these staffed ranges is the Jay Henges range in High Ridge, MO, located outside St. Louis. Range Supervisor Jake Hindman estimates that the range, which opened in 1994, receives 20,000 shooters each year. This continual high volume of fire led to maintenance and containment concerns regarding the inevitable lead remediation on the dirt berms. These concerns caused the Department of Conservation to decide it was time to invest in a “Total Containment Range” to eliminate costly lead clean up and maintenance while ensuring that no fired bullets left the shooing range.

The solution was Action Target’s Total Containment Trap (TCT) – Version 4. Some features of the TCT include:

  • Complete access into deceleration chamber
  • Modular chamber plates which require no cutting or welding – all parts bolt together.
  • All rounds fired are captured and guided into the deceleration chamber to expend their remaining energy as they harmlessly drop into a sealed collection system for recycling.

The Jay Henges Total Containment Trap measures 160 ft. wide with 20 shooting positions designed for heavy rifle use from the 100 yard firing line. The trap also features a unique self-supported engineered boom system that integrates into the frame of the bullet trap chambers, creating a support to the upper bullet trap plates without the need for a stand-alone truss system.

In late 2010, the Jay Henges range reopened, showcasing their new look with full concrete walkways, target holders, a bullet trap, and overhead baffles. Action Target would like to congratulate MDC on completing 75 years of public service and for their example in leading the way towards safe outdoor education by providing top notch facilities for citizens throughout the State of Missouri. Many thanks also to Action Target Midwest Range Consultant Chris Hart and Project Manager Brian Sanders for a seamless transition to the new bullet trap.

To read more about the Jay Henges Shooting Range visit https://mdc.mo.gov/regions/st-louis/jay-henges-shooting-range.

Range Project Spotlight: New Range In Pinellas County, Florida

Posted on by Marketing Action Target

The Pinellas County Sheriff’s Office will soon train in their new state-of-the-art outdoor baffled firing range. This new range includes Action Target’s high quality outdoor Total Containment Trap with a Screw Conveyor collection method. Both innovative systems make recycling much easier by catching all fired bullets in one 55 gallon barrel.

The new outdoor baffled firing range has a variety of tactical target systems, creating a multitude of training scenarios and environments that increase the range’s ability to do more than simply “qualifying” police officers.

Both ranges at the Pinellas County Sherriff’s Office include the follow training equipment and scenarios:

  • Running Targets—Essential for training since real-life threats do not stand still
  • Turning Targets—Used to create training environments promoting quick decision-making on how and when to take the shot
  • Multiple Threats—Programming “multiple adversaries” into gun fights and combat courses enhances training beyond single threat scenarios

Each training technique and target system is controlled by SmartRange—a computer software system that allows replication of “real world” scenarios. When engaging in a gun fight, officers experience several physiological changes to their bodies. Training in these realistic scenarios replicates this type of stress to help the officers learn how to handle it in a way that is safe and successful. When the moment does arise to put their training into action, they will have already learned how to more effectively manage their stress during action.

The range design includes input from Lt. Pupke (Pinellas County Sheriff), Lt. Littlejohn, Sgt. Chaisson, and Action Target. Everyone involved is pleased with the results of this fine training center. Action Target hopes to hold a training seminar at the range this coming spring, inviting local agencies to come and enjoy some great training on some great equipment.

We are proud of the foresight and planning done by Pinellas County, their leadership, their officers, and the citizens they serve. Thanks to the efforts of this agency, the Pinellas County Sheriff’s Office is now ready for anything the future holds for their department, putting the Action Target motto into action: “Better Equipped, Better Prepared.”

Range Project Spotlight: Winston-Salem, NC

Posted on by Marketing Action Target

Designing and building ranges for many years with Action Target, Mike Stilwell has been actively involved in countless shooting range projects, including his own successful 16 lane commercial range, Rangemasters of Utah. Having 13 years experience of owning and operating an Action Target range is what made Stilwell an excellent person to help design and build a range for the Winston-Salem Police Department (WSPD).

When Stilwell first became associated with the WSPD, they presented him with hand-drawn sketches, lots of notes, and passion to build a world-class indoor training facility. WSPD required more than the typical 25 yard police range. They wanted to build one of the longest indoor ranges found in their geographic region.

Stilwell first met the team from WSPD four years prior to this range build. He met Sgt. Bricker and Sgt. Hinson at Action Target’s Range Development Seminar held each year at Camp Butner, NC. Due to the lengthy process of getting their range started, Sgt’s Bricker and Hinson were no longer on the police force when the range was completed; however, the personnel change did not stop the project from moving forward. Stilwell is currently finishing the ranges with Sgt. Nelson and Lt. Watson to make the dream of building a world class training facility a reality.

The Winston Salem Training Academy is an indoor shooting range project currently being installed. It has two ranges, with one being 50 yards and the other 100 yards in length. There are tactical ranges with multiple Total Containment Traps–Version 4 (TCT4) bullet traps, with an open mouth throat for cross lane and tactical shooting. The TCT4’s have a screw conveyor lead collection system, inverted dual track runners, and 180 degree turning D-TaPS Target Systems. Both ranges are rifle rated and have 3/8” AR500 steel in the trap and on the baffles. The walls and ceilings are treated with PEPP acoustical material to ensure generous sound dampening, creating a comfortable area to practice shooting. The Winston Salem Training Academy is designed by the world-class A&E firm of Clark Nexsen with Dan Walker and Bobby Cummings taking an active role. The GC awarded the project was Branch & Associates from Roanoke, VA with Jerry DeVault as the Project Manager (PM). Clark Nexsen and Branch also designed and built the ranges at the Virginia Military Institute (VMI), which ATI was fortunate to be a part of.

Action Target and Stilwell consider it an honor to be a vital part of this world-class facility and to work with all of the individuals who made this project happen. Special thanks goes out to the Firearm Instructors of Winston Salem, both past and present, Bryan Dahlberg—Project Manager for Action Target—and Jerry DeVault—Project Manager for Branch & Associates—for their long, tireless hours.

If you’re ever near the WSPD, give them a call to set up a date and time to take a tour of their new facility. If you are considering an indoor or outdoor range project and are in the Mid-Atlantic States region, contact Mike Stilwell at [email protected]

Other recently completed projects include:

  • South East Territory – Browns Ferry Police Department
  • South West Territory – Orem Police Department
  • South Central Territory – Midwest Police Department
  • North Central Territory – Green Bay Police Department
  • North East Territory – Montgomery Police Department
  • North West Territory – Three Sites
  • East Central Territory – Shooters Edge, LLC

Range Project Spotlight: Junction City, KS Commercial Range

Posted on by Marketing Action Target

Action Target is widely known for constructing the toughest and most challenging shooting range projects in the world. Working together as a team allows us to overcome various obstacles we face as we design, build, and create ranges for our clients. For example, Action Target was approached by the Federal Reserve Bank to design and build a shooting range on the 17th floor of a major office building in Chicago, Illinois. When considering the noise, ventilation, and other items associated with a range, constructing a range in a skyscraper surrounded by offices was a challenge, but not an impossible task for Action Target. Through careful planning and execution, we created a .50 BMG rated shooting range complete with three lanes, stalls, and retrievers.

Action Target Builds New Commerical Range in Junction City, KSAction Target’s challenging builds don’t end there. When Chris Hart, Action Target Range Consultant of the South Central Territory, was approached with an equally challenging range project, he welcomed the opportunity by stating, “It’s not every day that you install a modern shooting range in a building from the 1800’s.”

Every commercial shooting range project requires two key elements to get it off the ground- passion and hard work. When it comes to Godfrey’s Indoor Range, Todd Godfrey had plenty of both in reserve when he embarked on this project. Todd, an officer with the Junction City Police Department, envisioned opening a commercial indoor shooting range to serve not only the citizens of Junction City and his fellow police officers, but also the soldiers stationed at neighboring Fort Riley.

In 2008, Todd toured Kansas City PD’s 30 lane tactical indoor range with ATI Midwest Range Consultant Chris Hart and Bill Provencher from Carey’s Heating and Air Conditioning, as the two companies worked together to build this range several years earlier. After viewing the range, Todd decided that Action Target was the partner to have. With a visitor’s pass from Action Target, Todd attended this year’s SHOT Show where he secured everything he needed to run his range business, from firearm distributors to inventory software (we are also happy to help all of our future range clients attend the SHOT Show with us).

Junction City, KS Commercial Range Build by ATIFor this commercial range, Todd secured some prime real estate in downtown Junction City–three vacant buildings totaling 20,000 sq-ft. on a main thoroughfare. However, this perfect location came with one catch–the building dates from the 1800’s. Building a range in a building this old would be challenging, but not impossible, for Action Target. Using ATI’s detailed range drawings, Todd began building out the structure to accept the modern range equipment. His company (yes, Todd has three jobs!), Godfrey Construction and Renovation, LLC, installed new ceiling trusses and concrete work. He also remodeled the building with a new store front that includes a luxurious lounge area for those waiting to shoot.

To accommodate the expected high volume of shooters, Todd chose Action Target’s Total Containment Trap with Dust Collection Unit, Rifle Rated Ceiling Baffles, Digital Smart Target Retrievers with SmartRange Master Control System and Level III clear Ballistic Glass Shooting Stalls. To enhance the realistic training environment, he connected the SmartRange system to his P/A system so he can broadcast sound effects such as gunfire, screaming, and sirens. The range also has police light bars to simulate felony vehicle stops. Carey’s provided a fully automated range ventilation system guaranteed to meet all OSHA and EPA regulations.

Junction City, KS Commercial Range Built by Action TargetGodfrey’s Indoor Range opened to the public on July 31, 2010 and was named Junction City’s 2010 Business of the Year within five months of opening. However, that wasn’t enough for Todd–he then got creative with his extra space and installed a state of the art 6,000 sq-ft. 3D archery range. To further service his range customers, Todd leases 4,000 sq-ft. of retail space to Quantico Tactical.

If you’re ever near exit 296 on I-70 west of Kansas City, do yourself a favor and stop by to meet Todd and his great staff and send a few rounds downrange while you’re there. Todd is currently available for consulting on range franchise opportunities and the construction of range facilities.

www.godfreysranges.com
Godfrey’s Shooting and Indoor Archery Ranges Facebook Page

Other recently completed projects include:

  • Smith & Wesson Range – Houlton, ME
  • Watts Bar Nuclear Range – TN
  • Triad Gun Source Range – NC
  • Denton County Sheriff’s Department Range – TX
  • Atlanta State Penitentiary Range – GA