Month: February 2011

Reactive Target Systems

At the 2011 Shot Show in Las Vegas, NV, we announced that Action Target is now the worldwide exclusive dealer of Reactive Target Systems (RTS) products. The great advantage RTS has over other systems currently on the market is the ability to build upon a base system. Shown below are all color options of the Static Package that includes a Self-Healing Torso Target , pole and base .

These self-healing Torso Targets can take approximately 2,000 rounds or more, depending on the caliber and distance, before needing replacement. The targets are lightweight and can be left outside all year long making them a great addition for any shooter.

The Static Package becomes reactive when adding the RTS Smart Joint . This innovative joint allows the shooter to engage the target at any distance, falling when struck. For scenarios when a falling target isn’t ideal, a pin can be used to keep the target upright. Shown below is the Smart Joint mounted into the base:

If you want to make your training even more dynamic, add the hit-counting capability to your target.  Using a specific algorithm, the RTS hit sensor reads each hit through a transmitter, sends the hit to a digital display , and informs you how many rounds struck the target. The hit-counting ability reads all calibers, including paintballs, Simunitions and Airsoft. As seen below, the digital numerator uses the same pole and stand as the target, allowing you to have your display stand out of the line of fire, yet remains visible.

As one of the most economical hit sensor/hit counting target systems available, available, this system can increase throughput for training and qualifications by 20-40%, allowing for more “trigger time.”

The RTS system has so many possibilities and applications for all segments of the shooting market, and we want to help you incorporate it into your training programs. RTS makes the difference, so contact a member of our team today!

Free Action Target Webinar featuring Hufcor’s FlexTact

We know that scenario training can be expensive and difficult to create. In most cases, staff members are required to travel to off-site facilities and spend an average of 4-8 hours reconfiguring a single scenario, shortening time spent actually training.

That is why we are proud to offer you a scenario training system that configures scenarios in less time increasing your training time – Hufcor’s FlexTact.

What’s even better is that Action Target is holding a free webinar entitled “Scenario-Based SIMS Training with FlexTact” to help you understand more about the product, how it saves you time, improves scenario training, and better prepares your organization for the myriad of threats and situations they will find themselves up against.

About Hufcor FlexTact

The Hufcor FlexTact is an innovative, affordable and moveable panel and track system that is designed for public safety training centers. It allows law enforcement and military trainers to quickly reconfigure layouts on its rugged tracks and trolleys to create different scenarios for various room-entry and clearing techniques. The system allows room changes to be completed in minutes. It effectively creates scenarios that presents the training needs of police, fire, rescue, SWAT teams, homeland security and military police. Currently, the FlexTact is being used by criminal justice colleges, regional training facilities, local law enforcement agencies and commercial range owners.

About the Webinar

During this 30 minute webinar, Scott Staedter, National Commercial Accounts Manger for Hufcor, Inc. will:
·      Introduce the Hufcor FlexTact
·      Discuss the benefits of the FlexTact system
·      Explain how the FlexTact system is installed within existing facilities
·      Present testimonials from current clients using the system

Update: This webinar has passed, so please visit our Online Trainings page to view the full, archived video of the webinar.

Free AT Hold with HD AT Rocker

Buy the AT Rocker in heavy-duty AR550 steel and get an AT Hold (base only) FREE!

Action Target RockerAction Target Hold

Enter the code ROCKS550 when placing your order in the online store for the discount. Ensure that you have added one AT Hold to your shopping cart to receive it in your order. Maximum one free AT Hold per order; only one code per order. Offer cannot be combined with other discounts or specials. Offer expires March 10, 2011.

This offer is available at the Action Target Store or by contacting the Territory Manager for your region.

Electronic Scoring: Kongsberg Mikroelektronikk

Editor’s Note: This article was originally published in February 2011. As of March 2013, Action Target no longer distributes or sells Kongsbert Mikroelektronikk electronic scoring targets.

At Action Target Inc., we are proud to be the US distributor of Kongsberg Mikroelektronikk electronic scoring targets. These targets are specifically designed to meet police and military marksmen, long-distance competitive shooters and club requirements. Through the use of acoustic technology, the targets accurately calculate every shot’s point of impact. We have targets for big and small bore applications with additional target sizes for various distances being shot.

Targets

Target sizes range from 280mm to 1500mm (approx. 11” to 60”) with three to four target sensors in each target. There are target options for all calibers including air rifles, big bore rifles and both static and lateral moving targets.

Monitors

Each target connects to a monitor that displays the hit locations to the shooter. Easy push-button controls allow the shooter to cycle through hits and options without having to change positions. The monitor is well protected by its aluminum frame that acts as a shade ensuring good visibility for the shooter. Thick non-glare glass adds additional protection to the display. These units come with a flexible carrying handle with adjustable stand.

Communication

The Signal Distribution Unit (SDU) is the communication link between the targets and monitors. It converts data from the hit sensors and gives precise readouts of hit locations on the monitor. An optional printer connection allows target and hit printouts to be made using the SDU.
For more information, please contact us, visit our Electronic Scoring page, or visit Kongsberg Mikroelektronikk’s website.

Fifteen 3D Targets for Half-Price with 3-Pack of 3D Target Stands

Buy a 3-pack of 3D Target Stands for $140 and get 15 3D Targets for half-price!

Action Target 3-D Targets

Enter the code 3D2011 when placing your order at our online store. Only one code per order. Offer cannot be combined with other discounts or specials.  (Shirts NOT included.) Offer expires March 3, 2011.

Offer available at the Action Target Store or by contacting the Territory Manager for your region.

Reducing Lead & Noise at Indoor Firing Ranges

A major concern when shooting at an indoor range is the contained nature it requires and the hazards present.  Workers and users of indoor firing ranges may be exposed to hazardous levels of lead and noise. The National Institute for Occupational Safety and Health (NIOSH) recommends steps for workers and employers to reduce exposures.

Shooter at Indoor Firing RangeAccording to the Bureau of Justice Statistics, more than 1 million Federal, State, and local law enforcement officers work in the United States [DOJ 2004]. They are required to train regularly in the use of firearms. Indoor firing ranges are often used because of their controlled conditions. In addition to workers, more than 20 million active target shooters practice at indoor firing ranges. Law enforcement officers may be exposed to high levels of lead and noise at indoor firing ranges. NIOSH estimates that 16,000 to 18,000 firing ranges operate in the United States.

Several studies of firing ranges have shown that exposure to lead and noise can cause health problems associated with lead exposure and hearing loss, particularly among employees and instructors. Lead exposure occurs mainly through inhalation of lead fumes or ingestion (e.g., eating or drinking with contaminated hands).

Action Target has been a pioneer, innovator and industry leader for limiting lead exposure and the reduction of noise at indoor shooting facilities.  Our ventilation systems are designed to ensure proper airflow across any range. Through our partnership with Carey’s Ventilation Systems, we provide the best performing and most efficient systems available on the market today. Our design exceeds NIOSH standards, and maintains a 100% success rate in industrial hygiene utilizing:

  • Ceiling Mounted Unique 180 degree Air Delivery Systems.
  • A design which makes plenum walls obsolete.
  • Digital and Analog control systems which adapt to changing environmental conditions to maintain the required air velocities and building pressures.
  • Upgrade packages for existing Firing Ranges available.
  • Custom designed systems to meet any type of application.

Carey’s has constructed our own Plexiglas-walled test range, which allows us to test air speeds, diffuser angles, ceiling heights and transitions, supply and return locations, duct sizing, and vortex settings to determine the optimal configuration for any type of range.

As another example of Action Target’s industry-leading partnerships, we have teamed with numerous sound abatement companies to meet the requirements of our customers.  Our sales staff can provide you with detailed information on past projects that required the expertise of our sound abatement partners.

We will work with you to design and build the indoor range that meets your needs.  If you would like to speak with an Action Target representative about the proven solutions we have for reducing lead and noise at your indoor facility, go to our Contact Us page.

To read more from NIOSH on this subject, Reducing Exposure to Lead and Noise at Indoor Firing Ranges